Warning

Pistol will fire from the half cock position if the trigger is pulled.

a. Double Action. When a round is in the chamber with the safety on and the hammer down, double action allows the pistol to fire by placing the safety in the fire postion and pulling the trigger.

b. Magazine. Has a 15 round capacity.

c. Extractor/Loaded Chamber Indicator. When there is a round in the chamber, the upper surface of the extractor protrudes from the right side of the slide. In the dark, the protrusion can be felt by touch.

WARNING

A potential safety hazard exists if the firing pin block is missing or does not return flush with the slide surface after firing.

d. Firing Pin Block. When the trigger is not pulled, the firing pin block secures the firing pin and prevents it from moving forward, even if the pistol is dropped.

e. Ambidextrous Safety. Allows safe operation of the pistol by both right and left handed users, and lowers the hammer without causing an accidentai discharge. When the safety is in the up position, the pistol is ready to fire. When hammer is cocked, it may be safely lowered by moving the safety to the safe (down) position.

f. Lanyard Loop. Compatible with standard lanyards.

g. Receiver. The front and back straps of the grip are vertically grooved to ensure a firm grip even with wet hands, or under conditions of rapid combat fire. The trigger guard is extended, and the concave forward portion is grooved for a firm grip when using two hands or gloves.

h. Disassembly Lever and Disassembly Button.

Allows for quick field stripping, and at the same time prevents accidental disassembly.

i. Slide Stop. Holds the slide to the rear after the last round is fired. It can also be manually operated.

19. WARRANTY INFORMATION. The M9, 9mm

Pistol is warranted by Beretta U.S.A. Corporation for 18 months from date of government acceptance for conformance to performance requirements. Warranty starts on the acceptance date found on DD 250. Warranty start date is the same as the acceptance date on the DD 250 and is contained in columns 76-80 of the weapons serial number control card. Submit all suspected warranty claims on SF 368 (QDRj to your appropriate command.

a. Slide Assembly. Houses the firing pin, striker, and extractor, and cocks hammer during recoil cycle.

b. Barrel Assembly. Houses cartridge for firing and directs projectile. Locking block locks barrel in position during firing.

c. Recoil Spring and Recoil Spring Guide.

Absorbs recoil and returns the slide assembly to its forward position.

d. Receiver. Serves as a support for all major components. Controls action of pistol through the four major components.

e. Magazine. Holds 15 cartridges in place for feeding and chambering.

SLIDE ASSEMBLY

Pistol Plans
RECEIVER

SLIDE ASSEMBLY

Slide Assembly

BARREL ASSEMBLY

RECOIL SPRING and RECOIL SPRING GUIDE

BARREL ASSEMBLY

RECOIL SPRING and RECOIL SPRING GUIDE

MAGAZINE

MAGAZINE

Beretta 92fs Slide Assembly

11-11. EQUIPMENT DATA. |

Caliber 9x19mm (9mm NATO)

System of Operation short recoil, semiautomatic

Locking system faffing locking block

Length 217mm I B.54 in.|

Weight (w/15 round magazine} 1145 gr (40.89 oz}

Weight i wfempty magazine) 960 gr (33.66 oz}

Barrel length 125mm (4.92 in.}

Rifling R.H., 6 groove [pitch 250mm (approx 1 turn in 10 in.)]

Muzzle velocity 375 meters/sec 11230.3 ft/sec)

Muzzle energy 569.5 newton meters {420 ft lbs)

Maximum effective range 50 meters {54.7 yards)

Front Sight blade, integral with slide

Rear Sight notched bar, dovetailed to slide

Sight radius 158mm 16.22 in.)

Safety features - ambidextrous safety

— firing pin block

Hammer {half cock) helps prevent accidental discharge

Magazine staggered, 15 round capacity

Slide held open upon firing of last round

Grips plastic, checkered

112. SAFETY, CARE, AND HANDLING (AMMUNITION ONLY).

Publications for firing, handling, care and preservation or destruction of ammunition are AR 385-63, TM 43-0001-27, and TM 9-1005-317-10.

Navy and Coast Guard users refer to OP 4 and OP 5.

Shipping and Storage Oata: Quantity Distance Class Storage Compatability Group Storage Code DOT Shipping Code DOT Designation

0 0

Post a comment