To Clear the HK USP

1. Make sure fingers are outside of the trigger guard and the pistol is pointed in a safe direction at all times!

2. Engage control lever (if applicable) - press the safety lever upwards until the"S" aligns with the reference line located on the frame.

3. Remove magazine - depress the magazine release lever and remove the magazine from the pistol.

4. Open and lock slide - while keeping the pistol pointed in a safe direction, lock the slide open by pulling the slide rearward as you press the slide release upward.Watch for a cartridge or empty case to be ejected from the pistol.

5. Inspect chamber - inspect chamber for the presence of a cartridge or empty case by:

• Visually viewing chamber through open ejection port and;

• Physically inserting finger into chamber through ejection port to check for a cartridge or empty case.

• Remove any cartridges or empty cases from the chamber or from within the pistol.

0 0

Post a comment