Step I Cock the hammer, place the seise tor in the safe position. Pull the trigger, the hammer should not fall.
Step 2 , With the selector in the semi-auto position, pull the trigger, the hammer ahould fall.
Keep holding the trigger to the rear, recock the hammer and release the trigger. The hammer should release from the hammer hook and reengage in the hemmer sear, NOTE
The hammer should not Fall fram this position until you pujl the trigger again.
Step 3 With the selector in the full-autD position, pull the trigger, the hammer should fall. Hold the trigger to the rear and recock the hammer, The hammer is now caught under the auto-sear. Still holding the trigger to the rear, push forward on the top of the auto-sear. The hammer should fall. Stifl holding the trigger to the rear, recock the hammer, relea9e the trigger, then push forward on the top of the auto-sear. The hammer should fall only to the sesr engagement.
Step If you understood steps I, 2, and 3 the First time ynu read them, and everything worked as it should, put the lower receiver to one side, have a shot of bourbon, pat your sweet thing on the fanny and get rsady to start on the upper receiver.
THE LAST CUT
Was this article helpful?
Ever Wanted to Get a Tattoo? Here is a Priceless Guide on How to Choose the Perfect Tattoo! Do you ever find yourself admiring the artistic work of another person’s tattoo? Do you wish you had the nerve to get one of your own but just aren’t sure you know enough about them to take that final step?