E Mounting To The M Carbine Cont

9. If forward and back motion is detected with the shim plate set to its #3 notch, remove the M203A2 from the carbine. Remove and re-insert the shim plate in its #4 position. Note that the #4 position is indicated by three dots stamped adjacent to its shim plate cutout, and that this side of the shim plate faces the muzzle.

# 4 POSITION

# 4 POSITION

DEPRESS PLUNGER TO REMOVE/INSTALL THE 5-POSITION ADJUSTMENT SHIM PLATE

10. If the #5 or maximum position is required, insert the shim plate as illustrated below.

# 5 POSITION (BACKSIDE OF ADJUSTMENT) SHIM PLATE FACES THE MUZZLE

# 5 POSITION (BACKSIDE OF ADJUSTMENT) SHIM PLATE FACES THE MUZZLE

T

FRONT \r

(MUZZLE) 1—^ <

VIEW JHk

V

©

DEPRESS PLUNGER TO REMOVE/INSTALL THE 5-POSITION ADJUSTMENT SHIM PLATE

0 0

Post a comment