M16a1 Take Down Pin Pin Location

The weapon must be cocked in order for safety lever to operate.

8. Cock grenade launcher. Turn grenade launcher upside down putting safety

(12) in safe position. Oil safety detent

(13) using one or two drops of CLP (item 5, app D). Operate the safety several times to work in the oil.

Grenade Drawings And Guns

ARMY TM 9-1010-221-23&P AIR FORCE TO 11W3-9-4-2 MARINE CORPS TM 07700A-23&P/2 NAVY SW 370-AE-MMI-010

11. Perform function check on receiver assembly in accordance with TM 9-1010-221-10.

M203 Receiver Assembly

9. Lubricate the barrel assembly track (14) and bore (15) using CLP (item 5, app D). Close barrel assembly.

10. Wipe all exposed surfaces of the receiver assembly with wiping rag (item 17, app D) with a small amount of CLP (item 5, app D) applied.

11. Perform function check on receiver assembly in accordance with TM 9-1010-221-10.

M203 40mm Grenade Launcher

1. Install upper receiver and barrel assembly to lower receiver and extension assembly and secure with receiver pivot pin (1) and takedown pin (2).

2. Use cleaning rod section to engage trigger guard (3) back in place.

ARMY TM 9-1010-221-23&P AIR FORCE TO 11W3-9-4-2 MARINE CORPS TM 07700A-23&P/2 NAVY SW 370-AE-MMI-010

Was this article helpful?

0 0

Post a comment