3. Install disconnector spring (4) by inserting large end of spring into trigger (5).
4. Install trigger spring (6) on trigger (5).
This task covers: | |
a. Disassembly |
c. Repair/Modify |
b. Inspection |
d. Reassembly |
INITIAL SETUP | |
Tool Equipment |
Equipment Conditions |
Tool and Gage Set (item 2, app B) |
3-62 Lower receiver and receiver ex |
tension assembly removed | |
Tools | |
General Safety Instructions | |
(item 3, app B) |
To avoid injury to your eyes, use care |
Field Maintenance Basic Less Power |
when removing and installing spring- |
Small Arms Shop Set (item 1, app B) |
loaded parts. |
When using solid film lubricant or | |
Materials/Parts |
dichloromethane, be sure the area is |
Cloth, abrasive (item 13, app D) |
well ventilated. |
Grease, molybdenum disulfide (item 19, | |
app D) | |
Lubricant, solid film (item 21, app D) |
a. DISASSEMBLY ![]() 1. Remove spring pin (1) from lower receiver (2) using 1/8 inch drive pin punch and hand hammer. 2. Remove trigger guard (3). |
Was this article helpful?
It Seems Incredible That You Can Get Your Ideal Body By Jumping. This Book Is One Of The Most Valuable Resources For The Fitness Adrenaline.
Post a comment