Note

Be sure all three drive pins on combination wrench are fully engaged with barrel nut assembly. Wrench must be pushed toward upper receiver assembly to compress the slip ring spring In barrel nut assembly. Do not use a torque wrench to loosen the barrel nut assembly.

8. Using '2 Inch drive handle and combination wrench (8), loosen barrel nut assembly (11)

M16a2 Parts Names

9. Separate upper receiver assembly (4) from barrel assembly (12) 10. Remove barrel assembly (12) from machinist's vise and barrel removal fixture

M16a2 Parts Names

11. Remove retaining ring (13) using retaining ring pliers.

12. Remove slip ring spring (14) and handguard slip ring (15).

13. Do not remove barrel nut (16) from barrel assembly (12).

Was this article helpful?

0 0
Plyometrics Fitness Adrenaline

Plyometrics Fitness Adrenaline

It Seems Incredible That You Can Get Your Ideal Body By Jumping. This Book Is One Of The Most Valuable Resources For The Fitness Adrenaline.

Get My Free Ebook


Post a comment