Adjustable rear sight cont

AFTER LUBING REAR SIGHT:

a. Reset your correct zero windage and your battlesight zero. Refer to pages 48-51.

b. Notice the rear sight comes down when the "3" is aligned with the mark on the left side of the receiver.

c. You will feel a "click" when the "3" first lines up with the mark.

d. Carry your rifle with the "3" aligned with the mark.

e. Keep the sight on 300 meters to keep dirt and water out of sight mechanism and protect the sight from damage.

AFTER AMPHIBIOUS OPERATIONS:

a. Clean your rear sight as soon as possible if it has salt water on it.

b. Wash your rear sight with fresh water from your canteen or some other source if you don't have time to clean it with CLP right away.

WARNING

Be sure the cam pin is installed in the bolt group. If it isn't, your rifle cart still fire and will explode.

5 Replace bolt cam- pin

FIRING PIN

6 Drop in and seat.

Be sure the cam pin is installed in the bolt group. If it isn't, your rifle cart still fire and will explode.

6 Drop in and seat.

5 Replace bolt cam- pin

7 Pull bolt out.

7 Pull bolt out.

NOTE

Firing pin should not fall out when bolt carrier group is turned upside down.

Barrett 82a1 Bolt Carrier Group
8 Replace firing pin retaining pin.

9 Engage, then push charging handle part way.

BE SURE BOLT IS STILL UNLOCKED.

9 Engage, then push charging handle part way.

BE SURE BOLT IS STILL UNLOCKED.

10 Slide in bolt carrier group.
11 Push charging handle and bolt carrier group together.

13 Engage receiver pivot pin.

12 Join upper and lower receivers.

12 Join upper and lower receivers.

13 Engage receiver pivot pin.

CAUTION

Selector lever must be on SAFE or SEMI before closing upper receiver.

14 Close upper and lower receiver groups. Push in takedown pin.

THE "BUDDY SYSTEM"

15 Place the rifle on the buttstock and press down on the slip ring with both hands.

NOTE

The round handguards are indentical (top or bottom).

16 Have your buddy install one handguard on top and the other on the bottom.

17 Snap on sling.

Was this article helpful?

0 0

Post a comment