Detailed Cleaning Techniques Cont

4 Point muzzle down. Hold the upper receiver in one hand while inserting the end of the rod without the brush into the chamber. Let the rod fall straight through the bore. About 2-3 inches will be sticking out of the muzzle at this point.

5 Attach the handle section of the cleaning rod to the end of the rod sticking out of the muzzle.

6 Pull the brush through the bore and out the muzzle. If you watch closely, you can see the rod twisting as you pull it.

7 After one pull, take off the handle section and repeat the process. After three or four pulls, you will see that the three rod sections and the bore brush are screwing together. Loosen them up and repeat the process.

Was this article helpful?

0 0

Post a comment