Initial Setup

Applicable Configuration M 16/M16A1 Rifle

Test Equipment Tool and Gage Set 8426685

Equipment Condition

Page Condition Description

2-35 Hand guards removed

3-10 Upper receiver and barrel assembly removed from lower receiver and extension assembly.

Tools

Small Arms Repairman Tool Kit SC 5180-95-CL-AO7 ( 19204) Field Maintenance Basic Less Power Small Arms Shop Set SC 4933-95-CL-A11 (19204)

Materials/Parts

Carbon removing compound (P-C-111 ) (item 8, app D)

Cleaner, lubricant and preservative (CLP) (item 9, app D)

Cleaning compound, rifle bore (RBC) (item 11, app D)

Cloth, abrasive (item 12, app D) Dichloromethane, technical (item 14, app D) Dry cleaning solvent (item 15, app D) Gloves, chemical and oil protective (item 16, app D)

Grease, molybdenum disulfide (item 17, app D) Lubricant, solid film (item 19, app D) Lubricating oil, weapons (LAW) (item 20, app D) Lubricating oil, weapons (LSA) (item 21, app D) Pan, wash (item 22, app D) Sealing compound (item 26, app D)

References FM 23-9

TM 9-1005-249-10 (operator's manual)

General Safety Instructions

To avoid injury to your eyes, use care when removing and installing spring-loaded parts. When using solid film lubricant or dichloromethane, be sure the area is well ventilated. When using P-C-111, avoid skin contact. If P-C-111 comes in contact with the skin, wash thoroughly with running water. Using a good lanolin base cream after exposure to the compound is helpful. Using gloves and protective equipment is recommended. Dry cleaning solvent is flammable and toxic and should be used in a well-ventiliated area. The use of rubber gloves is necessary to protect the skin when washing rifle parts.

Upper receiver and barrel assembly may be equipped with low light level front and rear sights. The front sight contains radioactive material. If so equipped, do not insert metal objects into the post slot or otherwise treat roughly to cause breakage of the radioactive element.

0 0

Post a comment