Group

1. When ihe action becomes excessively dirty, remove the trigger group and breechblock assembly from the receiver as explained under "Full Disassembly" on page 2»S. Clean with an oil such as Browning Oil or a gun solvent as necessary, using an old toothbrush to loosen any caked-on grime. Wipe the receiver cavity clean. Lightly oil the cavity (aerosol Browning Oil is ideal) and wipe it dry. No further disassembly is required for cleaning.

2. Reassemble the trigger group, breechblock.gas system and the barrel to

the receiver as explained previously. Then wipe all exposed metal surfaces with an oiled cloth making sure to wipe your A-500G clean of all finger marks where moisture will accumulate.

Was this article helpful?

0 0

Post a comment