The BPS pump shotgun is delivered with the magazine three shot adapter (plug) installed in the magazine, limiting magazine capacity to two shells in compliance with federal migratory bird regulations, if you do not wish to be limited to three shots — when it is not required by law — you can remove (or reinstall) the three shot adapter (plug) as follows:
ALWAYS WEAR PROTECTIVE SAFETY GLASSES DURING THIS OPERATION.
1. First, make certain the gun is totally unloaded and the 4isafetv" is "on safe."
CHECK THE MAGAZINE, FEED MECHANISM AND CHAMBER TO BE SURE THEY DO NOT CONTAIN ANY SHELLS.
(CONTINUED ON PAGE 14.)
Barrel Beveled Surface
Stabilizing Magazine Cap Lock Washer
Barrel Guide Ring
Barrel Stabilizing Split Ring
BROWNING BPS PUMP ACTION SHOTGUN
Schematic is provided for pans identification only and should not be used as a guide to assemble guns.
IMPORTANT: When ordering parts, list part number, part name, caliber, model and serial number. Do not use key number when ordering.
CAUTION: Browning parts are made exclusively for Browning guns and are not recommended for use in other guns even though models may be similar. Inadequately fitted parts may be dangerous.
Was this article helpful?