Failure To Follow The Above Instructions Could Result In Injury Or Death To Yourself Or Others

General Operating Procedures_

Highly skilled techniques of hand-Fitting and polishing have been used to accomplish the hairline fitting of metal pans on this gun. These painstaking operations are nccessary to prevent looseness, even after long use. You may consider your new gun to be slightly stiff. This close fitting, however, assures you of long lasting dependability.

4 Carefully disengage the barrel lug from the hinge pin and lift the barrel upward out of the action.

5 Reattach the forearm to the barrels as explained previously, except with the barrels separated from the receiver. This is an ideal and safe way to store your shotgun — in two separate pieces.

No Manual Safety_

CAUTION: REMEMBER, THE BT-100 SHOTGUN HAS NO MANUAL SAFETY. THE BT-100 IS DESIGNED SOLEL Y FOR TRAP SHOOTING.

A trap shooter does not load his or her gun until moments before a bird is called for. For this reason, and because trapshooting demands intense concentration on shooting technique, no manual safety is provided. There is then no chance for a lost bird by reason of the safety being inadvertently left "on safe."

LOAD YOUR BT-100 TRAP GUN ONLY WHEN SHOOTING IS IMMINENT. ONCE LOADED, THIS GUN IS READY TO FIRE AND SHOULD BE RESPECTED AS SUCH.

OPERATION OF THE TOP LEVER —

The top lever operates the locking bolt, which is very closely hand-fitted to its barrel lugs. Provision is made for the gradual wear of locking surfaces by allowing a slight excess of metal. This exacting metal allowance keeps the breech of the gun tight for many years.

Upon closing your gun, let the top lever snap into position — do not retard its action with your thumb. If closed in this manner, the top lever spring will return the top lever mechanism to the locked position. It is not necessary that the top ever return to a completely central position; in fact, it usually will not do so in a new gun. Many experienced shooters cultivate the habit of lightly pushing the top lever to the left after the gun is closed. It becomes automatic and is a quick method of assuring yourself that foreign matter has not interfered with the complete closure of the breech.

The breech is so tightly hand-fitted that foreign matter, sand, etc. may prohibit complete closing.

IF THE BREECH WILL NOT CLOSE COMPLETEL Y, UNDER NO CIRCUMSTANCES SHOULD YOU ATTEMPT TO FIRE.

Browning BT-100 Parts List

This parts list refers to the Browning BT-100 Shotgun only. Important: When ordering parts list part number, pan name, gauge and serial number, heel free to use our toll-free FAX number for parts orders: 1-800-817-4755.

Part No. Description__Part No. Description _ PdrtNo. Description_

P093012" Connector BT-100

P093013* Connector Pin BT-100

P093014' Corrector Spring BT-100 8mm

P093015* Connector Spring BT-100 9mm

P093016* Connector Spring Pin BT-100

P093720* Ejector BT-99, BT-99 Max & BT-100

P093020' Ejector Exiension BT-100

P093746 Ejector Hammer Spring BT-99 & BT-100

P093748 Rector Hammer Spring Guide BT-99 & BT-100

P093024 Ejector Hammer Spring Guide Bracket BT-100

P093732' Ejector Sear BT-99 & BT-100

P093734 Ejector Sear Pin BT-99 & BT-100

P093736 Ejector Sear Pin Spnng BT-99 & BT-100

P093738 Ejector Sear Pin Spring Fokwer BT-99 & BT-100

P093028 Ejector Selector Body BT-100

P093030 Ejector Selector Push Button BT-100

P093032 Ejector Selector Spring BT-100

P093033 Ejector Selector Spring Plunger BT-100

P093064 Hantner Pin BT-100

P093808' Joint Pin BT-99 & BT-100

P093810' Joint Pin Retaining Screw BT-99 & BT-100

P093068' Locking BoS BT-100

P093070' Lodong Bo-t Pn BT-100

P093074' Lower Connector Spnng Fotower BT-100

P093078 Mainspring BT-100

P093080 Mainspring Gude BT-100

P093082 Mainspring Guide Receiver BT-100

P093085' Push Rod BT-100

P093066 Push Rod Retaining Screw BT-100

P093089" Sear BT-100

P093090' Sear Spring BT-100

P093092' Sear Spnng Follower BT-100

P093095* Stock Compiete Ad,vstable BT-100

P093098' Stock Monte Carlo BT-100

P093100' Stock Thumbhote BT-100

P037145 Stock Adj. Stud Sere-« Citori Sporting Clays & BT-100

P093146 Tcp Lever Retainer Screw BT-100

P093148 Top Lever Spring BT-100

P093150' Tcp Lever Trip BT-100

P093154" Tcp Lever Trip Activator BT-100

P093156 Tcp Lever Trip Spring BT-100

P093160' Trigger BT-100

P093162' Trigger Block BT-100

P093165 Trigger Block Spring BT-100

P093168* Trigger Guard BT-1CO

P093172* Trigger Guard Stainless BT-100

P093174 Trigger Guard Pin BT-100

P093178' Trigger Plate BT-100

P09Q182- Trigger Plate Stainless BT-100

P093184 TriggerPlate Ejector Spring BT-100

P093186 Tngger Plate Ejector Spring Screw BT-tOO

P093188' Trigger Plate Lock BT-100

P093192' Trigger Plate Release Button BT-100

P093194' Trigger Plate Release Set Screw BT-100

P093196* Trigger Plate Release Spnng BT-100

P093Û35 Ejector Selector Spring Retaining Saew BT-100

P093728 Ejector Stop Screw BT-99 & BT-100

P093038' EjectorTrip Rod BT-100

P093775' Forearm & BT-100

P093780 Forearm Bot BT-99 & BT-100

P093784 Forearm Bol Escutcheon BT-99 & BT-100

P093040' Forearm Bracket BT-100

P093041* Forearm Bracket Stainless BT-100

P093787 Fcrearm Saew BT-99 & BT-100

P093W6' Firing Pin BT-100

P093047 Firing Pin Set Pin BT-100

P093048 Firing Pin Spring BT-100

P093050" Hammer BT-100

P093052' Hammer liter BT-100

P093053 Hammer Lifter Pin BT-100

P093054 Hammer Liter Roler BT-100

P093055 Hammer Utter Rofler Pm BT-100

P093057* Hammer Lifter Rotate BT-100

P093058 Hammer Litter Rotator Screw BT-100

P093060 Hammer Lifter Spring BT-100

P093122* Stock Base & Cheek Piece Assy. BT-100

P093385 Stock Bot BT-99 & BT-100

P093889 Stock Bot Lock Washer BT-99. BT-99 Max & BT-100

P093887 Stock Bolt Washer BT-99 4 BT-100

P093630' Take Down Lever BT-99 & BT-100

P093692' Take Down Lever Stainless BT-99 & BT-100

P093923' Take Own Lever Bracket Assy. BT-99 & BT-100

P093927* Take Own Lever Bracket Assy. Stainless BT-99 & BT-100

P093937 Take Down Lever Bracket Saew BT-100

P093938 Take Own Lever Bracket Saew Stainfess BT-99 & BT-100

P093920 Take Down Lever Pn BT-99 & BT-100

P093912 Take Down Lever Spring BT-99 & BT-100

P093915 Take Own Lever Spring Screw BT-99 & BT-100

P093891* Tapered Floating Rb 32* BT-100

P093992' Tapered Floating Rb 34* BT-100

P093140 Top Lever BT-100

P093142 Top Lever Stainless BT-100

P093144 Top Lever Retainer BT-100

P093193 Trigger Ptfl Adj. Screw BT-100

P093200 Trigger Stop Saew BT-100

P09320J- Upper Connector Spring Fofower BT-100

P037142 Drop Step Saew BT-10ûCitori Sporting Clays

P093654 Stock Adj. Nut BT-100. BT-00 Rus & Cöori Plus

P093655 Stock Adj. Plate BT-100. BT-00 Rus. & Citori Plus

P093664 Slock Adj. Plate Set Saew BT-100. BT-99 Rus. Citori Rus. & Citori Sporting Clay

P093651 Stock Adj. Set Saew BT-100. BT-99. & Otori (AB Models)

P093662 Stock Adj. Stud BT-100. BT-99 Rus & Otori Rus

' Indicates pan must be fitted by our shop or a qualified gunsmith. " Indicates part must be fitted by Browning's service facility in Arnold, Missouri, f Part may be purchased only by holders of current valid Federal Firearms License.

Browning BT-100 Single Barrel Trap Shotgun

Schematic is provided for pans identification only and should not be used as a guide to assemble guns.

CAUTION: BROWNING PARTS ARE MADE EXCLUSIVELY FOR BROWNING GUNS AND ARE NOT RECOMMENDED FOR USE IN OTHER GUNS EVEN THOUGH MODELS MAY BE SIMILAR. INADEQUATELY FITTED PARTS MAY BE DANGEROUS.

Single Barrel Gauge PartsBrowning Eurobolt

P0931S*

+1 0

Post a comment