Range estimation

The measured range will be displayed in meters or in yards depending on the model. As with targets, the object to be measured is aimed at in the center of the reticle (point or crosshairs). The rangefinder is activated and a measurement taken by pressing the button (8). After a maximum of 0.5 seconds, the measured range will be shown on the display in meters for 3 seconds (Fig. 7). If the range is more than 999 m or 999 yards (exceeds the display) it will be indicated by three zeros "0 0 0" (Fig. 8).

If the range is exceeded or the reflection of the object so insufficient that no measurement can be made, it will be indicated by three dashes "---"

(Fig. 9) that will also be displayed for 3 seconds.

0 0

Post a comment