Parts Illustration And List

This section is provided so that you may identify names of parts for your own interest. However, for adjustment, repair, or spare parts information, see Section 5—"Servicing and Repair".

DESCRIPTION

1. Barrel

2. Barrel Bushing

3. Barrel Link

4. Barrel Link Pin

5. Oisconnector S. Ejector

7. Ejector Pin

8. Extrader

9. Firing Pin

1D. Firing Pin Plunger

11. Firing Pin Spring

12. Firing Pin Stop

13. Front Sight

14. Grip Satety

15. Hammer

16. Hammer Pin

17. Hammer Strut

18. Hammer Strut Pin

19. Magazine Assembly

20. Magazine Catch

21. Magazine Catch Lock

22. Magazine Catch Spring

23. Magazins Follower

24. Magazine Spring

25. Main Spring

26. Main Spring Cap

27. Main Spring Cap Pin

28. Main Spring Housing (Hat]

29. Main Spring Housing Pin

30. Main Spring Housing Pin Retainer

31. Plunger Lever

32. Plunger Spring

33. Plunger Spring F/P

34. Plunger Tube

35. Rear Sight Leal Pin

36. Rear Sight Leaf

37. Rear Sight Elevation Screw

38. Rear Sight Elevation Spring (2)

39. Receiver

40. Recoil Spring

(2 different springs for Oelta Gold Cup) (Choice of springs for 45 cal, National Match]

41. Recoil Spring Guide

42. Recoil Spring Plug

43. Safety Lack

44. Safety Lock Plunger

45. Sear

46. Depressor

47. Depressor Spring

49. Sear Spring

50. Slide

51. Slide Stop

52. Slide Stop Plunger

53. Stock Sat

55. Stock Screw Bushing(4)

56. Trigger Assembly

57. Trigger Bar Lever

58. Trigger Stop

A1. Rear Sight Etev. Screw A2. Rear Sight Del Ball (2) A3. Rear Sight Oet. Spring A4. Rear Sight Leaf A5. Rear Sight Windage Screw A6. Rear Sight Windage Spring A7. Rear Sight Blade A8. Rear Sight Elev. Screw Pin A9. Rear Sight Leaf Pin A10. Rear Sight Elav. Screw (2] B1. Magazine Base Lock B2. Magazine Base

Sear Spring Colt National Match

FIGURE 1B-COLT GOLD CUP

NATIONAL MATCH MK IV/SERIES 80 PARTS ILLUSTRATION

FIGURE 1B-COLT GOLD CUP

NATIONAL MATCH MK IV/SERIES 80 PARTS ILLUSTRATION

SECTION 7

THE CUSTOMIZED GUN

Our Colt Custom Shop offers a wide range of special services such as engraving, inlaying and special serializing to the same high standard of quality long synonymous with the name "COLT". Sometimes modifications, which meet our customer's special requirements, necessitate deviations from standard design and manufacturing tolerances which result in functional differences from a standard gun. Consequently, this instruction manual does not apply to a customized gun unless its applicability has been confirmed by the Coit Custom Shop. For further information, write to Colt Custom Shop, P.O. Box 1868, Hartford, Connecticut 06144-1868, USA.

CONVERSION UNITS...IMPORTANT. You may eventually decide to purchase a colt 22, 9mm or other caliber Conversion Unit for your series 80 pistol. When you do, NOTE that only a Colt Series 80 Conversion Unit is compatible with it. Do NOT install an incompatible Conversion Unit on a Series 80 pistol because the combonation may render the firing pin safety inoperable, If in doubt get advice from Colt's.

FIREARM RECORD

Colt Model

Caliber_

Purchased from_

Date

Purchased

Purchase Price_

WARRANTY STATEMENT

Based on Magnuson-Moss Warranty Act, Colt offers no express warranty on its product line, However, Colt recognizes its obligations concerning implied warranty, Colt also stands behind its product as it has historically, and will continue to provide service to its product line as it has over the years, Colt products will be serviced for a period of one year from date of retail purchase, for defects in materials or workmanship, at no charge to the purchaser. Be sure to retain your sales slip as proof of purchase date when making a claim.

I HEALTH AND ENVIRONMENTAL WARNING

Discharging firearms in poorly ventilated areas, cleaning firearms, or handling ammunition may result in exposure to lead and other substances known to cause birth defects, reproductive harm, cancer, and other serious physical injury. Have adequate ventilation at all times. Wash hands thoroughly after exposure.

If your instruction manual becomes lost or destroyed, obtain a replacement by writing to Colt's Manufacturing Company, inc., Box 1868, Hartford, Connecticut 06144-1868, USA or call 1-800-962-COLT, Make a note of the address. When requesting a manual, include the information which is on the left side of your firearm together with its serial number or quote the Part No. as shown on the back cover of this manual.

Was this article helpful?

+2 -5

Responses

  • julio
    How to disassemble a Series 80 Colt MK IV Gold Cup National Match?
    8 years ago
  • Laura Gamgee
    What does the depressor and depressor spring do on a colt series 80 gold cup pistol?
    6 years ago
  • Aziz Tekle
    How do you identify the series and year of manufacture of a colt gold cup?
    3 years ago

Post a comment