Troubleshooting Causes And Remedies

If your firearm is properly used and maintained, malfunctions will rarely occur. However, if such a situation does occur please observe the following instructions.

CAUTION - if a malfunction occurs, the possibility of an unintentional discharge is substantially increased. For this reason, when clearing malfunctions, observe the Safety Instructions already mentioned above. Keep the rifle pointed in a safe direction, do not turn the rifle against your body or anyone else's. Do not place your hands in front of the barrel!

Malfunction

Possible Cause

Remedy

A round has not been fed into the chamber.

Magazine is not fully inserted or is damaged. The rifle or cartridges are fouled (dirty).

Insert magazine properly or change magazine. Clean the rifle and cartridges and wipe them dry or as the case may be slightly lubricate.

Firing Pin hole fouled (dirty) or improper lubrication agent used during low temperature conditions.

Follow the Safety Instructions according to point 19. Disassemble and clean the firing pin or use low temperature lubricant.

A shot sounds "weak".

The primer has been activated but no powder load was inside the cartridge case.

Unload the rifle and check that the bullet is not lodged in the barrel. Any subsequent shot could cause damage to the barrel!

The spent case has not been ejected.

Cartridge chamber, extractor or ammunition dirty or unsuitable lubricant in low temperature environment

Clean and wipe the rifle dry or eventually lubricate lightly with a suitable agent. Use clean and new ammunition.

If you cannot clear away any malfunction in the manner described above, entrust the rifle to a competent gunsmith for inspection and repair.

ILLUSTRATION AND LIST OF PARTS

ILLUSTRATION AND LIST OF PARTS

Disassembler 452

1 Barrel

2 Front Sight

3 Front Sight Screw

4 Front Sight Cover

5 Front Sight Base

6 Rear Sight Leaf

7 Rear Sight Leaf Spring

8 Rear Sight Blade

9 Rear Sight Windage Screw

10 Rear Sight Slide

11 Rear Sight Locking Piece

12 Locking Piece Spring

13 Rear Sight Base

14 Rear Sight Base Pin

15 Receiver

16 Magazine Housing

17 Magazine Housing Front Screw

18 Magazine Housing Rear Screw

19 Magazine Catch

20 Magazine Catch Spring

21 Magazine Catch Pin

22 Sear

23 Sear Steel Ball

24 Sear Spring

25 Sear Pin

26 Trigger

27 Trigger Rivet

28 Trigger Pin

29 Trigger Rod Pin

30 Trigger Rod

31 Trigger Rod Nut

32 Trigger Spring Washer

33 Trigger Pull Spring

34 Bolt Guide

35 Bolt

36 Extractor

37 Holder

38 Extractor Spring

39 Safety

40 Bolt Handle

41 Striker

42 Striker Spring

43 Striker Spring Support

44 Stock

45 Butt Plate

46 Butt Plate Screw (2x)

47 Front Stock Screw

48 Front Escutcheon

49 Sling Swivel Assembly

50 Sling Swivel Wood Screw

51 Sling Swivel

52 Sling Swivel Screw

53 Elastic Spacer

54 Trigger Guard

55 Trigger Guard Plate

56 Trigger Guard Screw (2x)

57 Rear Stock Screw

58 Magazine Shell

59 Magazine Follower

60 Magazine Follower Spring

61 Magazine Base

62 Magazine Plunger

63 Magazine Plunger Spring

10 Shot Magazine:

1 Magazine Shell

2 Magazine Follower

3 Magazine Follower Spring

Single-shot Adapter:

1 Adapter Body

2 Feeder

3 Pin

4 Spring

Scout Version:

1 Barrel

2 Front Sight

3 Front Sight Cover

4 Rear Sight Leaf

5 Rear Sight Base

6 Rivet

7 Slide

The Company, reserves the right to make any changes it thinks necessary to improve its models or to meet any requirements of manufacturing or commercial nature.

TECHNICAL SPECIFICATIONS

Model

Standard Lux

Style Silhouette

FS

Scout

American

Varmint

Caliber

22 LR 22 WMR

22 LR

22 LR

22 LR

22 LR 22 WMR 17 HMR

22 LR 17 HMR

Overall Length

[mm]

1083

1083

995

830

1020

998

Barrel Length

[mm]

630

630

495

412

572

530

Sight Radius (Open Sights)

[mm]

508

508

410

320

-

-

Weight (Empty Magazine)

[kg]

3

3

2,9

1,8

2,8

3,2

Magazine Capacity

[cartridges]

22 LR: 5/10/1 - 22 WMR: 5 - 17 HMR: 5

Trigger Pull, Adjustment Range

[N]

14

18

Was this article helpful?

0 0

Responses

  • Lito Mondragon
    how to disassemble CZ 452 ZKM Rifle rear sight
    9 years ago
  • lesley
    What is zkm defective?
    9 years ago
  • laura mckinney
    How to remove 25mm stuck cartridge M242 rounds?
    9 years ago
  • anniina
    How to fix trigger housing on Ortgies & Co?
    9 years ago
  • laila
    How to sight in a cz452 rifle?
    8 years ago
  • SANTOS
    Hello <br />i need Item 49 SLING Swivel X2<br />can you send it to me i am in france
    7 years ago
  • anja
    How to disassemble a cz 4522e zkm?
    7 months ago

Post a comment