The Toolhead

Your new AT 500 is equipped with a removable tool-head. Additional toolheads are available from the factory or your local Dillon dealer.

The advantage of this system is simple. Once you have adjusted your dies just the way you want them, they can stay that way. Plus, changing to another caliber becomes a simple matter of pulling two pins and sliding the toolhead out. (Figure 10)

Figure 10 - Removing the toolhead.

Figure 8 - Lowering the platform onto the primer cup.

Figure 10 - Removing the toolhead.

Before you begin loading, make sure that the toolhead is secured by the toolhead pins.

Figure 13 - Placing the cartridge case in the shellplate.

Figure 11 - Toolhead/die station orientation.

Was this article helpful?

0 0

Post a comment