Fig

Step 10) Install new locator pins FIG 174:

The new locator pins are located in your caliber conversion kit.

1. Install as depicted

Step 10) Install new locator pins FIG 174:

The new locator pins are located in your caliber conversion kit.

1. Install as depicted

3. Swing the ejector wire back to its original position over the shellplate and insert the shellplate bolt FIG 172.

4. Using a 1/4" Allen wrench run the shellplate bolt down until it stops then loosen it slightly. Loosen it just enough to allow the shellplate to index freely.

Was this article helpful?

0 0

Post a comment