Fig

C. Station 2 - Installation of powder measure assembly FIG 32:

3. Remove the powder funnel FIG 36 from the bag containing the locator buttons.

type. The bottom of the rifle-style funnel fits snugly over the neck of the case, allowing powder to drop in without spilling (the rifle-style powder funnel does not bell the mouth of the case). The bottom of the pistol funnel, on the other hand, fits inside and actually expands and bells as it guides the powder into the case. Powder funnels are caliber specific, so be sure you have the correct funnel by referring to the caliber conversion chart.

4. Insert the funnel into the die FIG 38. Make sure that you insert the funnel into the die with the grooved end up. The funnel should move up and down freely.

Was this article helpful?

0 0

Post a comment