Fig

2. Install the casefeed post as shown in FIG 10. Make sure the bend in the post is facing away from you FIG 11.

3. Using two 7/16" wrenches, tighten the bolts.

D. Installation of the Casefeed Tube Bracket FIG 11.

Install as shown in FIG11.

Note: If you ordered your machine with the optional casefeed assembly, you won't need to use the casefeed tube bracket. This is because the upper end of the casefeed tube is supported by the casefeed bowl.

E. Installation of the Optional Casefeeder FIG 12:

Was this article helpful?

0 0

Post a comment