Fig

4. Remove the rotary primer disc FIG 166. Make sure the detent ball remains in place.

5. Place the other rotary primer disc onto the disc pin.

6. Slip the primer support shim back into place and snug the screw.

7. Reinstall the primer system.

Change the primer magazine (see note just above Step 6):

1. Remove the Primer Early Warning System FIG 167.

Change the primer magazine (see note just above Step 6):

1. Remove the Primer Early Warning System FIG 167.

Step 8) Change the primer punch (see note just above Step 6):

Was this article helpful?

0 0

Post a comment