Fig

To Install the Spacer Washer:

a.1. FIG 14 Remove the casefeed plate.

a.2. With the casefeed plate removed, disassemble the clutch drive. To do so unscrew the two clutch screws.

a.3. Install the spacer washer as illustrated in the casefeed schematic (page 57). IMPORTANT: The spacer washer goes between the lower clutch and the case-feed plate.

a.4. Reassemble the clutch drive and reinstall the casefeed plate. (Note how the clutch drive engages the drive pin).

Was this article helpful?

0 0

Post a comment