Fig

1. Raise the platform.

2. Using a 9/16" wrench loosen and remove the primer punch FIG 171.

3. Remove the other size primer punch from the primer accessory package. Screw it in and snug it down.

4. Lower the platform.

Step 9) Install the new shellplate:

This is located in your caliber conversion kit.

1. Remove the shellplate (ref. Step 4).

2. Place the new shellplate onto the shellplate platform. The number side of the shellplate should be face up. Rotate the shellplate until it seats itself on the index ball.

Was this article helpful?

0 0

Post a comment