Fig

5. Align the casefeed bowl so the spring clamp is directly over the casefeed adapter. Place the casefeed tube into the casefeed adapter then snap the tube into the clamp FIG 23.

Note: One end of the casefeed tube is beveled and one end is squared off. Insert the squared end of the tube (down) into the top of the casefeed adapter.

Station 2 - Powder Measure

Note: One end of the casefeed tube is beveled and one end is squared off. Insert the squared end of the tube (down) into the top of the casefeed adapter.

Was this article helpful?

0 0

Post a comment