3 Twist recoil spring clockwise, and pull recoil spring and ring assembly (51) forward off magazine tube. Pull operating handle (49) outward to disassemble from breechbolt (9). Move breechbolt with attached slide (60), locking block (43), and links (40) (41) forward out of receiver. Replace magazine cap on magazine tube for safe retention of magazine spring (47).
6 Reassemble in reverse. To reassemble shell latch, locate it in channel in left of receiver. Align hole in shell latch flush with front trigger plate pin in receiver. Check to be sure that back end of disconnector (22) is below the left connector (19). Then, position rear of trigger plate assembly in receiver, drop front into place, and insert pins.
Was this article helpful?
Deer hunting is an interesting thing that reminds you of those golden old ages of 19th centuries, where a handsome hunk well equipped with all hunting material rides on horse searching for his target animal either for the purpose of displaying his masculine powers or for enticing and wooing his lady love.