Service Procedures And Trouble Shooting

Failure to eject or erratic ejection including stove pipes Slide fails to lock open on last round Extractor worn broken missing Over-powered or under-powered defective ammunition Dirt under extractor claw Dirty chamber Under-powered ammunition Dirty chamber Shooting with an unlocked wrist Lack of lubrication Dirty gun Magazine not properly inserted Under-powered ammunition Dirty magazine Weak magazine spring Dirty chamber Tight extractor Deformed magazine Weok recoil spring Magazine follower...

Table Of Contents

Glock Accessories

Exploded Drawings and Parts list- __6 Safety Devices Trigger Safety, Firing Pin Safety, Safety Function of the Trigger Mechanism Housing- 8 III. Technical Data Specifications- 10 VI. Preventative Maintenance-19 Cleaning the Field Stripped Firearm-19 Function Testing the Trigger Safety--21 Function Testing the Firing Pin Safety-1-21 Trigger Mechanism Housing Pin Removal- _29 Service Procedures and Trouble Shooting--42 Glock Ports and Accessories Glock 17--44 Glock Parrs and Accessories Glock...

Front And Rear Sight Removal Installation

Glock Front Sight Removal

To remove the front sight from the slide, position the front of the slide in upside down position over the edge of a table or workbench. While firmly holding the slide on the workbench, tap the front sight from the slide with a pin punch and small hammer or, the slide may be held in a vice to perform this procedure. If a vice is used, be sure that protective aw covers are used so as not to damage the slide . INSERT a new front sight into the front sight slot and press it flush with the top...

Ammunition Specifications For Glock Pistol

Glock Slide Assembly

GIOCK pistols are designed to be fired with NATO specification ammunition. Therefore the following guidelines and specifications are provided so that proper ammunition will be selected for use in GLOCK pistols to assure proper functioning. Any deviation from these specifications may lead to improper functioning and possibly void the warranty on GLOCK pistols. GLOCK pistols will function properly with the new generation of 9x19mm ammunition including all p and 147 grain sub-sonic ammunition...

Sight Installation Device

Glock Sight Installation Device

HOW to OPERATE the GLOCK INSTALLATION and ADJUSTMENT DEVICE for REAR SIGHTS For use with GLOCK 17, GLOCK 17L, GLOCK 19, GLOCK 22 and GLOCK 23. CAUTION Before installing or adjusting rear sights, BE SURE that your pistol is UNLOADED, with the MAGAZINE REMOVED. Strictly obey the following INSTALLATION SAFETY PRECAUTIONS Remove magazine while pointing pistol in safe direction with finger off the trigger . Lock the slide to the rear by pushing up on the slide stop lever while pushing the slide to...

Service Procedures And Trouble Shooting cont

Glock Cleaning Procedures

Slide out of battery DO NOT FORCE INTO BATTERY due to Under-powered ammunition Damaged weak recoil spring Damaged recoil spring tube Mating surfaces of barrel, slide and receiver excessively dirty. Gun dirty obstructed chamber Shooting with an unlocked wrist Hard primer SMG ammunition Obstructed firing pin channel Inspect and replace round Change ammunition Replace recoil spring Replace recoil spring tube Field-strip and clean Clean chamber Lock shooting hand wrist Change ammunition Remove,...

This Armorers Manual Is To Be Supplemented By Technical Bulletins

Glock 9mm Silber

Information and Specifications contained within this manual may change without notification. This manual provides basic service and backup information for certified GLOCK armorers, and is not intended for use by other people. Certification can only be granted by GLOCK after attending a GLOCK armorer's school. GLOCK cannot be held responsible for any misinterpretation of the instructions in this manual that can lead to improper functioning of the pistol. For additional information and service...