New York Trigger Spring

The NY Trigger Spring is an alternative to standard coil trigger spring for revolver-like trigger characteristics. The New York Trigger Spring is produced in two colors with 2 differently colored springs for two different trigger pulls. Either spring should be installed only with the 5 lb. connector, neither should be installed with the 8 lb. connector.

The standard New York Trigger Spring (olive/ silver) will increase the 5 lb. connector to an approximate 8 lb. trigger pull. The second and stronger version of the New York Trigger pull (called New York Trigger "2," orange/black) will increase the 5 lb. connector to an approximate 12 lb. trigger pull

Apply downward pressure with punch to snap into place

Glock Trigger Mechanism

Trigger Mechanism Housing

N.Y. Trigger Spring

"Snaps" into place

Trigger Mechanism Housing

N.Y. Trigger Spring

Before installing a New York Trigger Spring in older Model GLOCK17 and 19 pistols, be sure that the connector fits tightly in the trigger mechanism housing. If the connector does not fit tightly in the trigger mechanism housing, replace with new parts to ensure a tight fit of the connector in the trigger mechanism housing.

Apply downward pressure with punch to snap into place

Trigger Bar

"Snaps" into place

Was this article helpful?

0 0

Post a comment