Windage adjustment

Correction of left-hand deviation: Loosen clamping screw (Fig. 38). Turn adjusting screw (Fig. 39) counterclockwise, in accordance with the required correction. Then retighten clamping screw. Correction of right-hand deviation: Loosen clamping screw (Fig. 38). Turn adjusting screw (Fig. 39) clockwise until the required correction is obtained. Then retighten clamping screw.

Note: Each revolution of the adjusting screw moves the mean strike 5.5 cm (2.16 in.) to the left or right at a range of 25 m.

Fig. 39

Rotating the adjusting screw

Loosening the clamping screw

Fig. 39

Rotating the adjusting screw

Was this article helpful?

0 0

Post a comment