Reloading the Rifle

Method 2: The magazine in the weapon is empty.

The bolt has been held in its rear position by the bolt catch.

1 • Set the safety/fire selector lever at "Safe."

2 • Push the magazine catch forward with the thumb and remove the empty magazine (see Figure 22 below).

Figure 22 Release magazine (push forward)

3 • Insert a loaded magazine into the magazine well until the magazine clearly engages. Tug on the magazine to ensure it is securely engaged.

4 • Swivel the cocking lever out, pull it all the way to the rear and release (see Figure 20).

The weapon is now loaded and set on "Safe."

Was this article helpful?

0 0

Post a comment