Scope of Supply

1.3.1 One telescope sight

Drawing No. 330143-9001 Stock No. 1240-12-144-0714

Item Name

1.3.2 Two rubber protection caps

Drawing No. 330108-0202

Stock No. 1240-12-129-4060

Item Name PROTECTION CAP, TELESCOPE SIGHT

20

22

= Grey filter

21

= Telescope sight with mounting

27

= Container

12

assembly and rubber protection caps

28

= Tool kit w/ accessories

(Figure 6)

(Figure 6)

15 25 23 17 20

12 =

Protection caps

21

= Mounting assembly

15 =

Elevation adjustment control

22

= Grey filter

16 =

Lateral adjustment control

23

= Detent ring (Elevation control)

17 =

Dioptrical adjustment control

24

= Detent ring (Lateral control)

20 =

Telescope sight

25

= Cover screws

(Figure 5)

(Figure 5)

One anti-dazzle filter

Drawing No. 330108-9003

Stock No. 1240-12-144-0715

Item Name FILTER, LIGHT, TELESCOPE

1.3.4 One container

Drawing No. 330143-9004

Stock No. 1240-12-144-0713

Item Name CONTAINER, TELESCOPE SIGHT

1.3.5 One tool kit with accessories

Drawing No. 335917 Stock No.

Item Name TOOL KIT, complete 1.3.5.1 One tool kit holder

Drawing No. 335917-8010 Stock No. 5140-12-146-5698

Item Name TOOL KIT HOLDER

1.3.5.2 One screwdriver

Drawing No. 335917-8020 Stock No. 5120-12-121-1092

Item Name SCREWDRIVER, LONGITUDINAL SLOT TYPE

4.5 X 40 mm blade, 100 mm long

1.3.5.3 One dust brush

Drawing No. Acc. To TL 7920-024 Stock No. 7920-12-120-0355

Item Name BRUSH, DUST, OPTICAL LENSES 10 mm dia., quill-type holder

1.3.5.4 One lens cleaning rag

Drawing No. Stock No. Item Name

80 x 115 mm gezackt 6640-12-124-6982 CLEANING RAG, LENS Cotton, 80x115 mm

One holder (mount)

Drawing No. Acc. To HK 100 236

Stock No. 1240-12-140-9932

Item Name MOUNTING, TELESCOPE SIGHT, RIFLE

Technical Data

Optical Data

Telescope magnifying power (V) 4 x

Entry pupil diameter (EP) Exit pupil diameter (AP) Dioptrical adjustment Angle of field of vision Field of vision Reticule layout

Insert filter

24 mm 6 mm

Target mark with lateral graduation grid, according to FINABEL

Telescope Sight Marks
Layout Pattern of Reticule (Figure 4)

10 =

Main tube

15

= Elevation adjustment control

11 =

Eyepiece

16

= Lateral adjustment control

12 =

Protection cap

17

= Dioptrical adjustment control

13 =

Attachment screws

18

= Telescope sight holder

(Figure 3)

(Figure 3)

Mechanical Data and Dimensions (Figure 1)

Angular sight adjustment control, 100 to 600 meters with detents for steps of 100 meters each

Over travel for adjustment

Lateral adjustment control, with detents for steps of .25" each

Over travel for adjustment

All telescope sights are adjusted to the same point at elevation setting "1" and lateral setting "0"

Total length of telescope sight assembly with rubber protection caps

Rubber protection cap Tube

Sight lens eyepiece

Distance between optical axis and sight tube holders

Telescope sight tube holders

Mounting screws

Container (outside dimensions)

Distance between optical axis and theoretical bore axis (due to mounting)

Permissible deviation +/-0.5"

230 mm

38 mm diameter

29 mm diameter

30 mm diameter 20.5 mm

According to STANAG 2324

1.4.3 Weight Data

1.4.3.1 Telescope sight

1.4.3.2 Telescope sight with mounting assembly

1.4.3.3 Telescope sight with mounting assembly and container with accessories

1.5 Structure

1.5.1 General

Approx. 0.35 kilos Approx 0.65 kilos

Approx 1 kilo

The telescope sight is a monocular telescope of linear structure with an inversion lens system. For the setting of the sight angle the target mark will be adjusted in elevation.

Optical Structure (Figure 2)

The incoming light beams pass through lens (1) and are generated on the first image plane. The reticule (2) with target mark is arranged in this image plane. The image of the first image plane is generated in the image plane of the eyepiece via two double-member inversion lenses (3 and 4), and observed through the eyepiece (5). A gray filter (6) can be inserted optionally in front of the eyepiece.

1.5.3 Mechanical Structure (Figure 3)

The telescope sight consists of the main tube (10) with the attached eyepiece sleeve (11). One rubber protection cap (12) each is attached on the sides of lens and eyepiece. Two attachment screws (13) are provided for the attachment to the mounting assembly.

1240 144 0715

1 =

Eyepiece

4 =

Inversion lens

2 =

Reticule Plate

5 =

Eyepiece

3 =

Inversion lens

6 =

Grey filter

Optical Structure (Figure 2)

Optical Structure (Figure 2)

Maintenance Schedule

Item:

Period:

Explanation:

3.1

w, p, a

w = weekly

3.2

w, p, a

m = monthly

3.3

p, a

p = prior to use

3.4

m

a = after use

3.5

*

* = conditional

Telescope Sight Holders According to STANAG 2324

Main Dimensions of Equipment (Figure 1)

The following components are externally attached to the main tube (10): Elevation adjustment control (15), lateral adjustment control (16), dioptrical adjustment control (17), and telescope sight holders (18) designed according to STANAG 2324. The eyepiece (1) and the reticule plate (2) with their mechanical mountings are installed in the interior of the main tube.

The eyepiece sleeve (11) contains the eyepiece (5) and the two double-member inversion lenses (3 and 4).

The protection caps (12) arranged on the eyepiece and lens sides of the unit also serve as protection against mechanical damage; when the sight is not used, they are closed by reversing.

The attachment screws (13) serve for the attachment of the telescope sight on the mounting assembly. They are provided with a self-locking Nylon insert

Was this article helpful?

+1 0

Post a comment