Removal Of The Firing Pin Assembly And BuSHING

a) Depress cocking lever until the end of the firing pin is flush with the slot in the firing pin bushing.

b) Push the firing pin busing with your thumb or a suitable coin all the way forward and rotate 90° clockwise (to the right).

c) Depress cocking lever fully and remove the firing pin bushing together with the firing pin assembly.

NOTE: THE FIRING PIN BUSHING CAN ONLY BE REMOVED WHEN THE SLIDE IS MOUNTED ON THE RECEIVER. DO NOT USE EXCESSIVE FORCE TO TURN THE BUSHING.

2. INSTALLATION OF THE FIRING PIN ASSEMBLY AND BUSHING

CAUTION: FURTHER DISASSEMBLY OF THE FIRING PIN IS NOT RECOMMENDED; HOWEVER, IF FOR ANY REASON THE FIRING PIN ASSEMBLY IS FURTHER DISASSEMBLED, CARE MUST BE TAKEN THAT THE FIRING PIN COLLAR PIN IS CORRECTLY SEATED IN THE SLOTS OF THE FIRING PIN COLLAR. IMPROPER ASSEMBLY MAY CAUSE MALFUNCTION.

a) Insert firing pin assembly and bushing into the slide end until the chamber of the firing pin bushing is even with the slide end.

b) Rotate the firing pin bushing 90° counterclockwise (to the left) until it engages its slot in a vertical position.

Collar pin seating ▼

Was this article helpful?

+1 0

Responses

  • Barry
    How to remove arisaka 99 firing pin?
    8 years ago

Post a comment