Fuze Point Detonating Mai Assembly And Details

n-HMP

n-HMP

Improvised Detonators

ASMtMOU fWSKOt KtO&tFi-----

WXAtA&S, WAaWK

73-l-iKM

ASMtMOU fWSKOt KtO&tFi-----

WXAtA&S, WAaWK

73-l-iKM

CO«r TVOtAt« QFCUP WTM PCTfW»* CMOft VTU tMttam T*0 THBCAfiS WTTH BOOT «MM

AmBN«nvei?B«cuK BY STMOTM.

CO«r TVOtAt« QFCUP WTM PCTfW»* CMOft VTU tMttam T*0 THBCAfiS WTTH BOOT «MM

AmBN«nvei?B«cuK BY STMOTM.

Improvised Detonators

ASSMSLI X£DUC£0

C&Ji Of&flNG 70 J&A4CK

THBSAOS Of MAD N« faptg PUIS WITH METTMAM CEMtfft AFTER CN£A6fKS THKAD WlTHSaW AS5EMSLV.

ASSMSLI X£DUC£0

C&Ji Of&flNG 70 J&A4CK

W/uwrz

W/uwrz

Detonator Booster Assembly

1. Prior to Fuze assembly, press the Tetryl Booster Lead into position through the bottom of the Fuze Body.

2. Press the Primer/Detonator, green side up, into the hole in the top of the Slider Assembly.

3. Insert Safety Pin and Spring into Fuze Body. Hold them in position until the Setback Pin, Spring, and Plug can be installed, locking the Safety Pin in place. The Setback Pin should be inserted with its hole aligned with the Safety Wire Hole. Install the Safety Wire at this time.

4. Install the Slider Guide Pin through the bottom of the Fuze Body. Note that this version, (pg.63) is a GUIDE PIN ONLY. The Slider is held in proper firing position by the Slider Spring ONLY.

5. Insert Slider, aligning the slot on the bottom with the Slider Guide Pin. Install Slider Spring and Slider Plug.

6. Apply permatex to the threads on both the Striker Head and the Booster Cup. Screw both assemblies tightly into place on the Fuze Body.

7. Remove Closing Plug from loaded Shell Body.

8. Apply permatex to the external Fuze Body threads and screw Fuze Assembly tightly into place w/Fuze Wrench.Staking Fuze in place is optional.

wr Otnt jutett cvr ae./w am** ¿scour* «(«h oe «hm.

rue****** Mwc/miv tor *>{//>**£a(¿Mctv&jre w/r/Ms a* j*/*rat or t tus*#) h//rw veuw srrttcit. muz . Jmv .innwr-- Vh»t ¿.or aC-C-CC \

SHELL.HE.n+SAZ W/j

W/FUZEPO n&At

'SLY AWtX/M

0 0

Post a comment