3. Cut stock from wood using saw or knife.
4. Cut 3/8 in. (9-1/2 mm) deep "V" groove in top of stock.
5. Screw end cap onto pipe until finger tight.
6. Attach pipe to stock with string or tape.
7. Bend metal strap into "L" shape and drill holes for wood screw. Notch metal strap on long side 1/2 in. (1 cm) from bend.
8. Position metal strap on stock so that the top will hit the center of hole drilled in end cap.
I"! Drill I Hole
Was this article helpful?