Tape

HOW TO USE:

PROCEDURE:

1. Drill four 1/16" holes and one 1/8" hole through the wood block as shown.

1/16" HOLE 1/8" HOLE

2. Form two "U" shaped pieces from 1/16" copper wire to the dimensions shown. J

ONE 1" HIGH ONE 1-1/2" HIGH

The switch is placed in a hole in the path of expected traffic and covered with a thin layer of dirt or other camouflaging material. The mine or other explosive device connected to the switch can be buried with the switch or emplaced elsewhere as desired.

Was this article helpful?

0 0

Post a comment