Assembly And Preparation For Use cont

M1114 Pintle Mount

8 Remove two machine bolts (7) and two lockwashers (8) and separate travel lock bracket assembly (9) into two halves (10).

9 Install two halves (10) of travel lock bracket assembly (9) on structural tube (11) with travel lock bracket assembly (9) holes facing rear of HMMWV. Secure by installing two lockwashers (8) and two machine bolts (7).

10 Remove self-locking nut (12), two flat washers (13), and hexagon head capscrew (14) from travel lock bracket (15).

11 Align mounting holes in travel lock bracket (15) with mounting holes in travel lock bracket assembly (9), and install two flat washers (13), hexagon head capscrew (14), and self-locking nut (12).

(b) M1025/M1026/M1114 HMMWV:

1 Loosen four set screws on HMMWV pintle adapter (16).

2 Install pintle adapter assembly

(17) and secure by tightening four set screws.

3 Install applicable mount pintle

(18) P/N 11010408 or 12986102 and attach travel lock bracket (19) on HMMWV pintle adapter assembly (17) following steps (7) (a) 4 thru

Blank Firing Deflector

1 Install deflector plate (20) and secure to ammo adapter bracket assembly (21) with two cap screws (22) and two nuts (23).

Was this article helpful?

0 0

Post a comment