M Machine Gun Mount Legs And Attaching Hardwaremaintenance Instructions

THIS TASK COVERS:

a. Disassembly b. Inspection/Repair

c. Reassembly

INITIAL SETUP

Tools and Special Tools

Lifting Device

Sling (4-point)

Small Arms Repairman Tool Kit (item 2, appx B)

Small Arms Shop Set (item 1, appx B)

Materials/Parts

Self-locking nut (12) (MS21044-N8)

Mount Machine Gun

1 Remove 12 self-locking nuts (1), 12 hexagon head capscrews (2), 12 flat washers (3), and 4 gun mount legs (4, 5, 6, and 7) from M66 machine gun mount ring. Discard self-locking nuts.

2 If damaged, remove mounting hardware used to secure gun mount legs to hull.

3 If damaged, remove webbing straps (9). INSPECTION/REPAIR

1 Inspect for broken, damaged, or missing parts.

2 M66 machine gun mount ring is a repairable assembly. Refer to paragraph 8-1.

3 Repair is by replacement of authorized parts (appx C). REASSEMBLY

1 It removed, install webbing straps (9).

2 If removed, install mounting hardware used to secure gun mount legs to hull.

3 Place 4 gun mount legs (4, 5, 6, and 7) on M66 machine gun mount ring (8) and secure with 12 flat washers (3), 12 hexagon head capscrews (2), and 12 new self-locking nuts (1).

Was this article helpful?

0 0

Responses

  • MARMADOC
    What is a mount gun ring m66?
    8 years ago

Post a comment