THIS TASK COVERS:
1 Release pintle lock assembly (10) and remove mount pintle (7) (M122 only).
2 Remove one retaining clip (3) and remove pin (4).
3 Remove flex mount (6) (M122A1 only) from sleeve bushing (8) and the mechanism assembly (5).
4 Turn traversing lever (2) counterclockwise and remove traversing and elevating mechanism (1) from traverse bar assembly (9).
1 Inspect for broken, damaged, or missing parts.
2 Traversing and elevating mechanism (1) is a repairable assembly. Refer to paragraph 6-2.
3 Mount pintle (7) is a repairable assembly. Refer to paragraph 6-3.
4 Flex mount assembly (6) is a repairable assembly. Refer to paragraph 9-1.
5 For further disassembly of tripod leg assembly, notify direct support maintenance.
6 Repair is by replacement of authorized parts (appx C).
Was this article helpful?