Reassembly
1 Install clamping catch (7) on ammo can holder (4) with two machine screws (6) and two new sell locking nuts (5).
2 Install top bracket (3) on ammo can holder (4) with two machine screws (2) and two new self-locking nuts (1).
- 14-4. MOUNTING BRACKET—MAINTENANCE INSTRUCTIONS
|
THIS TASK COVERS: |
|
|
a. Disassembly b. Inspection/Repair |
c. Reassembly |
|
INITIAL SETUP |
|
|
Tools and Special Tools |
|
|
Small Arms Repairman Tool Kit |
|
|
(item 2, appx B) |
1 Pull headed shoulder pin (1) from weldment bracket (2).
2 Spread ends of S-hooks and remove chain assembly (3) from headed shoulder pin (1 ) and weldment bracket (2).
13 Remove two handknobs (4).
INSPECTION/REPAIR
1 Inspect for broken, damaged, or missing parts.
2 If weldment bracket is broken or damaged, repair is by replacement of next higher assembly
3 Repair is by replacement of authorized parts (appx C).
REASSEMBLY
11 Install two handknobs (4) on weldment bracket (2).
2 Install chain assembly (3) on weldment bracket (2) and headed shoulder pin (1).
3 Install headed shoulder pin (1 ) in weldment bracket (2). 
- 14-5. CATCH BAG ASSEMBLY—MAINTENANCE INSTRUCTIONS
|
THIS TASK COVERS: |
|
|
a. Disassembly b. Inspection/Repair |
c. Reassembly |
|
INITIAL SETUP |
|
|
Tools and Special Tools |
|
|
Small Arms Repairman Tool Kit |
|
|
(item 2, appx B) |
NOTE
When disassembling catch bag, pull Velcro seal away from catch bag frame.
1 Open Velcro seals and remove catch bag (1) from catch bag frame (2).
2 Spread ends of retaining-ring (3) and remove quick-release pin (4) from catch bag frame (2).
INSPECTION/REPAIR
1 Inspect for broken, damaged, or missing parts.
2 If catch bag frame is broken or damaged, repair is by replacement of next higher assembly
3 Repair is by replacement of authorized parts (appx C).
REASSEMBLY
1 Spread ends of retaining ring (3) and install quick-release pin (4) on catch bag frame (2).
2 Install casings bag (1), with Velcro unsealed, onto catch bag frame (2). Close Velcro seals. 
- 114-6. UNIVERSAL PINTLE ADAPTER—MAINTENANCE INSTRUCTIONS
|
THIS TASK COVERS:
a. Disassembly b. Inspection/Repair |
c. Reassembly |
|
INITIAL SETUP |
|
|
Tools and Special Tools |
|
|
Small Arms Repairman Tool Kit |
|
|
(item 2, appx B) |
|
|
Materials/Parts |
|
|
Loctite (MIL-S-22473) |
DISASSEMBLY
Remove machine screw (1 ) and quick-release pin assembly (2) from body (3).
|
Was this article helpful?
| |
Post a comment