Repair

The MK93 MOD 1 machine gun mount consists of .50 caliber ammo holder assembly (1), MK93 MOD 0 machine gun mount (2), mounting bracket (3), catch bag assembly (4), universal pintle adapter (5), traverse andelevation mechanism (6). Repair of individual components is contained in Chapter 14.

14-2. YOKE ASSEMBLY AND CARRIAGE ASSEMBLY—MAINTENANCE INSTRUCTIONS

THJS TASK COVERS:

a. Disassembly b.Inspection/Repair

c. Reassembly

INITIAL SETUP

Tools and Special Tools

Small Arms Repairman Tool Kit

(item 2, appx B)

1 Remove two headless shoulder pins (1) from machine gun cradle (2).

2 By spreading ends of retaining ring, remove quick-release pin (3) from yoke (4).

3 By spreading ends of retaining rings, remove quick-release pin assembly (5) and quick-release pin assembly (6) from machine gun cradle (2).

INSPECTION/REPAIR

1 Inspect for broken, damaged, or missing parts.

2 For further disassembly of yoke assembly and carriage assembly notify direct support maintenance.

3 Repair is by replacement of authorized parts (appx C).

REASSEMBLY

1 Install quick-release pin assembly (6) and quick-release pin assembly (5) in machine gun cradle (2).

2 Install quick-release pin (3) in yoke (4).

3 Install two headless shoulder pins (1) in machine gun cradle (2).

Mk93 Mod Machine Gun Mount
14-3. .50 CALIBER AMMO HOLDER ASSEMBLY—MAINTENANCE INSTRUCTIONS

THIS TASK COVERS:

a. Disassembly b. Inspection/Repair

c. Reassembly

INITIAL SETUP

Tools and Special Tools

Small Arms Repairman Tool Kit

(item 2, appx B)

Materials/Parts

Self-locking nut (4) (MS21044C3)

DISASSEMBLY

Was this article helpful?

0 0

Post a comment