Ring Assembly Ring Assembly And Ringmaintenance Instructions cont Reassembly

1 Lightly coat 16 separator segments (1) with grease and install in outer seal ring (2).

2 Lightly coat 96 roller bearings (3) with grease and install in 16 separator segments (1).

3 Carefully lower upper revolving ring (4) into outer seal ring (2).

4 Align lower revolving ring (5) with upper revolving ring (4) and secure with 22 socket head capscrews (6) and 22 new self-locking nuts (7).

5 Install shoe brake assembly (8) in upper revolving ring (4). Install brake lining clamp (9) on lower revolving ring (5) and secure with two socket head capscrews (10).

6 Install ring brake (11), two socket head capscrews (12), two flat washers (13), and two new self-locking nuts (14).

7 Install new mechanical felt (15) in outer seal ring (2). Pierce 22 holes in mechanical felt.

8 Install seal retainer ring (16), 22 new lockwashers (17), and 22 machine screws (18) in lower revolving ring (5).

Gun Pintle Socket Blueprint

9 Install new mechanical felt (19) in outer seal ring (2).

10 Install new mechanical felt (20) in outer seal ring (21). Pierce 24 holes in mechanical felt.

11 Install outer seal ring (21) on upper revolving ring (4) so that cushioning pad bracket (22) is directly opposite pintle socket (23). Secure outer seal ring with 24 new lockwashers (24) and 24 machine screws (25).

12 If separated, assemble seal ring segment (26), seal ring segment (27), and seal ring segment

(28), and secure with two headed straight pins

13 Install three seal ring segments (26, 27, and 28) on outer seal ring (21) and secure with new lockwasher (30) and machine screw (31).

14 Install pintle lock handle (32) in upper revolving ring (4) and secure with two new cotter pins (33).

15 Install headless shoulder pin (34), manual control handle (35), helical compression spring (36), and ring spacer (37) in upper revolving ring (4) and secure with new cotter pin (38).

16 Install sleeve bushing (39) in upper revolving ring (4).

17 Install weldless chain (40), two S chain hooks (41), and pintle lock cap (42).

Higgins Model Parts

Was this article helpful?

0 0

Post a comment