Section Unit Maintenance Instructions Flexible Machine Gun Mount Maintenance Instructions

THIS TASK COVERS:

a. Disassembly b. Inspection/Repair

c. Reassembly

INITIAL SETUP

Tools and Special Tools

Small Arms Repairman Tool Kit (item 2, appx B)

Materials/Parts

Nonelectrical wire (item 10, appx E)

DISASSEMBLY

Remove nonelectrical wire (1), four capscrews (2), and holder assembly (3) from lower cradle support (4). Discard nonelectrical wire (M240E1 only).

Remove nonelectrical wire (1), four socket head capscrews (6) and upper cradle assembly (7) with attached parts from lower cradle support (4). Remove round deflector (16) if damaged (M122A1/ M240G only). Discard nonelectrical wire.

Remove two retaining rings (8) from headless grooved pin (9).

Remove headless grooved pin (9) and mount pintle (10).

Remove two retaining rings (8) from grooved pin (18) and separate traversing and elevating cradle bracket (17) (M122A1/M240G only).

M122a1 Tripod

M122A1

M122A1

Was this article helpful?

0 0

Post a comment