Caution

If the forward link strippers were not removed, the upper and lower feed sprockets must be rotated to provide clearance from the forward link strippers.

a. Pull forward feed assembly (13) away from feeder drive assembly (1).

b. Remove forward feed assembly (13).

M242 Feeder

8. REMOVE FORWARD FEEDER GATE (WP 0033 00).

9. REMOVE CARTRIDGE GUIDE CAPSCREW. Remove capscrew (14) from cartridge guide (15).

10. REMOVE CARTRIDGE GUIDE.

Pull cartridge guide (15) away from forward feed assembly (13).

M242 Parts

INSPECTION

1. INSPECT FORWARD FEED ASSEMBLY.

a. Visually inspect forward feed assembly (1) for cracks and broken parts. If either of these conditions are found, replace forward feed assembly.

b. Visually inspect inside diameters of upper bushing (2) and lower bushing (3) for scoring, galling, and pitting. If any of these conditions are found, replace defective bushing(s) (WP 0035 00).

c. Visually inspect inside diameter of support (4) for scoring, galling, and pitting. If any of these conditions are found, replace forward feed assembly.

2. INSPECT CARTRIDGE GUIDE.

Visually inspect cartridge guide for chips, bent guide, and galls. If any of these conditions are found, replace cartridge guide.

Color Line Art Kitchen Equipment
1df0285
1df0286

LUBRICATION

LUBRICATE FORWARD FEED ASSEMBLY BUSHINGS.

Using acid brush, apply light coat of grease to two bushings (1) and (2), and support (3) on forward feed assembly (4).

INSTALLATION

1. INSTALL CARTRIDGE GUIDE.

a. Install cartridge guide (1) in slot (2) of forward feed assembly (3).

b. Slide cartridge guide (1) in slot (2) until cartridge guide holes align with holes in forward feed assembly (3).

c. Install capscrew (4) in cartridge guide (1) and torque to 67 in.-lb + 8 in.-lb (7.57 N-m + 0.90 N-m).

2. INSTALL FORWARD FEEDER GATE (WP 0033 00).

3. INSTALL FORWARD FEED ASSEMBLY.

Was this article helpful?

0 0

Post a comment