Do not drop lockwire pieces into gun. Wire can get between moving parts and damage gun.
4. INSTALL CAPSCREWS.
a. Install three capscrews (8) into three stepped spacers (9). Torque three capscrews (8) to 160 in.-lb ± 10 in.-lb (18.08 N-m ± 1.13 N-m).
b. Lockwire capscrew (4) to nearest capscrew (8).
5. POSITION FEEDER DRIVE ASSEMBLY.
Place feeder drive assembly (10) on a clean, flat surface with feeder handle (11) down.
6. INSTALL SELF-LOCKING NUT.
Was this article helpful?