Caution

Do not drop lockwire pieces into gun. Wire can get between moving parts and damage gun.

6. INSTALL LOCKWIRE ON CAPSCREWS.

Install lockwire on two capscrews (28) and externally relieved screw (16).

1df0726

1df0726

8. INSTALL SEAR CATCH ASSEMBLY (WP 0064 00).

9. INSTALL COVER ASSEMBLY AND SEAR RETRACTOR ASSEMBLY (WP 0063 00).

10. INSTALL DIRECT CURRENT MOTOR (WP 0061 00).

11. INSTALL STRAIGHT DRIVE SHAFT (WP 0060 00).

12. INSTALL BOLT AND TRACK ASSEMBLY (WP 0053 00).

13. INSTALL BREECH ASSEMBLY IF REMOVED (WP 0051 00).

14. INSTALL BARREL SUPPORT ASSEMBLY IF REMOVED (WP 0050 00).

15. INSTALL RECOIL MECHANISM IF REMOVED (WP 0049 00).

16. PERFORM AUTO GUN RECEIVER MANUAL CYCLE CHECK (WP 0008 00).

17. INSTALL AUTOMATIC GUN FEEDER (WP 0026 00). END OF WORK PACKAGE

UNIT

M242 25-MM AUTOMATIC GUN (NSN 1005-01-086-1400) M242 25-MM ENHANCED AUTOMATIC GUN (NSN 1005-01-454-0396)

PREPARATION FOR STORAGE OR SHIPMENT OF BARREL ASSEMBLY PRESERVATION OF BARREL ASSEMBLY - LEVEL A; MARKING OF BAGGED BARREL ASSEMBLY; INSTALLATION OF BARREL ASSEMBLY IN CONTAINER; MARKING OF EXTERIOR CONTAINER

INITIAL SETUP:

Tools and Special Tools

Goggles (item 19, WP 0085 00) Heat sealing machine (item 33, WP 0085 00) Marking stencil set (item 39, WP 0085 00) Strapping and sealing kit (item 40, WP 0085 00)

Materials/Parts

Black color lusterless enamel (item 8,

WP 0116 00) Black stencil ink (item 12, WP 0116 00) Corrosion inhibitor treated volatile paper

(item 16, WP 0116 00) Cushioning material (item 7, WP 0116 00) General lubricating oil (item 14, WP 0116 00) Interior packaging sleeve (item 26,

WP 0116 00) Pressure sensitive adhesive tape (item 29,

WP 0116 00) Pressure sensitive adhesive tape (item 31,

WP 0116 00) Sand color lusterless enamel (item 9,

WP 0116 00) Wiping rags (item 21, WP 0116 00)

Was this article helpful?

0 0

Post a comment