Caution

Hold bevel gear to prevent dropping when motor is lowered into place.

e. Place direct current motor (1) on auto gun receiver (5) with electrical bracket (7) to rear of auto gun receiver. Align mounting holes.

f. Install and torque four capscrews (8) to 160 in.-lb ± 10 in.-lb (18.08 N-m ± 1.13 N-m).

1df0615

2. CONNECT ELECTRICAL CONNECTOR.

a. Mate electrical sear solenoid connector (9) with motor/sear plug (10). Push connector in gently until seated.

INSTALLATION - Continued b. Push electrical sear solenoid connector (9) into motor/sear plug (10) while turning connector lock ring (11) clockwise. Turn connector lock ring (11) clockwise until snug.

Was this article helpful?

0 0

Post a comment