Electrical Checkout Continued

Perform resistance check between pins N & P on motor/turret plug. Is there a reading of 1.0 to 4.0 ohms?

Disconnect motor/sear plug (J3 connector). Check for continuity through motor between pins J1-N & J3-A and J1-P & J3-C.

Is there continuity?

YES.

NO

V

YES

Replace direct current

motor (WP 0061 00).

Replace electrical sear solenoid (WP 0052 00).

ELECTRICAL

SEAR SOLENOID

SEAR RELEASE LINK (PUSH TO ACTUATE ELECTRICAL SEAR SOLENOID)

MOTOR/TURRET PLUG

SEAR RELEASE LINK (PUSH TO ACTUATE ELECTRICAL SEAR SOLENOID)

Desenhos Para Fazer Pra Mae

MOTOR/TURRET PLUG

AUTO GUN RECEIVER (BOTTOM VIEW)

AUTO GUN RECEIVER (BOTTOM VIEW)

Manually actuate electrical sear solenoid and hold firmly through this block of checks. Perform resistance check on motor/turret plug through this block of checks.

At pins N & P, is there a reading of 30 to 50 ohms?

At pins N & D, is there a reading of 1.0 to 4.0 ohms?

Disconnect motor sear plug (J3 connector). Check for continuity through motor between pins J1-N & J3-A, J1-D & J3-B, and J1-P & J3-C. Is there continuity?_

YES.

Replace electrical sear solenoid (WP 0052 00).

Was this article helpful?

0 0

Post a comment