Location And Description Of Major Components

a. BARREL ASSEMBLY: Mounts in front end of auto gun receiver. The barrel gives directional control to the projectile and brakes some of the barrel recoil. The ribbed barrel has two types of internal finishes, nitride and chrome. While either type of barrel is usable on the standard gun, the chrome barrel is required for the enhanced gun. The non-ribbed barrel is only used on the standard gun.

Autocannon Characteristics
b. AUTOMATIC GUN FEEDER:

(1) Mounts on top of auto gun receiver.

(2) Removes linked ammunition from chutes.

(3) Strips rounds from links.

(4) Places round into face of bolt.

(5) Removes spent cartridge case from face of bolt.

(6) Provides a means of selecting any one of two types of available ammunition.

(7) There are two types of automatic gun feeders, standard and enhanced. The enhanced feeder features quick-detachable link covers and a "built-in-test" (BIT) ready feed select solenoid. While the enhanced feeder is usable with the standard gun, it is required for the enhanced gun.

AUTOMATIC

FEEDER

AUTOMATIC

FEEDER

Feeder Automatic Gun
AUTO GUN RECEIVER

ENHANCED AUTOMATIC

GUN FEEDER if>

c. AUTO GUN RECEIVER:

(1) Provides a means of securing the automatic gun to a mount.

(2) Rams and fires the rounds, and extracts and ejects spent cartridge cases.

(3) Suppresses the recoil force from the barrel and breech assembly.

(4) There are two types of auto gun receivers, standard and enhanced. The enhanced receiver features a larger breech assembly, longer recoil, a triple spring drive clutch and a BIT-ready gun drive motor. The enhanced auto gun receiver is required for the enhanced gun.

AUTO GUN RECEIVER

AUTO GUN RECEIVER

Alkar Automatic Pistol

Was this article helpful?

0 -1

Post a comment