Note

Make sure rear gate assembly is between rim guide and pivot before installing capscrew.

d. Insert capscrew (9) through rear gate assembly (8).

ASSEMBLY - Continued e. Turn rear plate assembly (2) around.

f. Install flat washer (10) and new self-locking nut (11) on threaded end of capscrew (9).

4. INSTALL REAR PLATE ASSEMBLY (WP 0073 00).

5. PERFORM FEEDER DRIVE ASSEMBLY MANUAL CYCLE AND ELECTRICAL CHECK (WP 0018 00).

6. INSTALL UPPER EJECT GUIDE (WP 0042 00).

7. INSTALL STEPPED SPACERS (WP 0041 00).

8. INSTALL FEEDER STANDOFF (WP 0040 00).

9. INSTALL UPPER AND LOWER FEED SPROCKET ASSEMBLIES (WP 0039 00).

10. INSTALL FEEDER ASSEMBLY ROTOR (WP 0036 00).

11. INSTALL FORWARD FEED ASSEMBLY (WP 0034 00).

12. INSTALL EJECTION CHUTE (WP 0032 00).

13. INSTALL REAR LINK STRIPPERS (WP 0031 00).

Was this article helpful?

0 0

Post a comment