Note

Bevel gear may not require use of gear puller if gear is a loose fit. d. Using mechanical puller, remove bevel gear (7).

How Does Paint Gun Work

INSPECTION

1. INSPECT DIRECT CURRENT MOTOR AND BEVEL GEAR.

a. Visually inspect direct current motor (1) for cracks, dents, and broken or bent parts. If any of these conditions are found, replace direct current motor.

b. Visually inspect direct current motor connectors (2) for bent or damaged connector pins. If connector pins are bent, straighten connector pins. If connector pins are damaged, replace direct current motor.

c. Visually inspect direct current motor (1) for presence of proper lockwire (3). If wire is missing, replace lockwire.

d. Visually inspect bevel gear (4) for cracked or broken teeth and damaged splines. If any of these conditions are found, replace bevel gear.

Was this article helpful?

0 0

Post a comment