Note

The worm shaft nut has left hand threads.

a. Place worm shaft (22) in vise with vise jaw caps in place.

b. Using plastic faced hammer and 1/4 in. roll pin punch, lightly tap worm shaft nut (25) counterclockwise on solid lug to fully seat worm shaft nut on shaft.

c. Using 5 mm hex head, torque capscrew (26) securing worm shaft nut (25) to 60 in.-lb ± 3.0 in.-lb (6.78 N-m ± 0.34 N-m).

Was this article helpful?

0 0

Post a comment